OPSS Low Electrical appliances equipment
Product Safety Report: Easee One EV Charger Backplate BP-AP-1/s01-01 (2604-0019)
Published by Office for Product Safety and Standards (OPSS):
Reason for the recall
- A small quantity of backplates were fitted with incorrect labelling.
Reasonsee the original notice
BrandEasee
Batch number(s)not stated
Barcodenot stated
Product
Easee One EV Charger Backplate BP-AP-1/s01-01
- Brand
- Easee
- Name / model
- BP-AP-1/s01-01
- Category
- Electrical appliances equipment
- Country of origin
- Norway
- Type of recall
- Product safety report
- Summary
- Product: Easee One EV Charger Backplate BP-AP-1/s01-01
- Hazard: A small quantity of backplates were fitted with incorrect labelling.
- Corrective action: Modification programme.
- Product information
- Type
- Electrical appliances and equipment - Electric Vehicle Supply Equipment (EVSE)
- Brand
- Easee
- Model
- BP-AP-1/s01-01
- Country of Origin
- Norway
- Product Description
- The Easee One Backplate (BP-AP-1/s01-01) is a wall-mounted wiring base for the Easee One EV charger. It provides the electrical termination interface where the supply cables are connected. Affected units were placed on the UK market during a limited period between late September 2025 and 3 February 2026.
- Product Report and Image
- Link to product image and PDF
- Hazard
- The affected units have been fitted with an incorrect three‑phase terminal label. Specifically, the terminal that should be clearly marked as “PME” (Protective Multiple Earthing) is incorrectly labelled as “L3”, which may mislead installers during installation. This incorrect labelling could cause an electrician to connect the PME conductor to the standard PE terminal instead of the dedicated PME terminal, potentially bypassing the charger’s built‑in PEN fault detection and automatic disconnection function required for UK PME installations.
- Corrective action
- Modification programme.
- Easee have identified affected products using serial number traceability and installer records. Where a mislabelled unit is confirmed to be incorrectly wired and without external PEN protection, charging is temporarily paused until remediation is completed. Where required, corrective actions include inspection, replacement of the backplate and verification by a qualified electrician.
- Additional information
- PSD notification number: 2604-0019
- Notified by: Office for Product Safety and Standards
What to do
- Modification programme.
- Product information
- Type
- Electrical appliances and equipment - Electric Vehicle Supply Equipment (EVSE)
Source: Product Safety Alerts, Reports and Recalls (OPSS) — Office for Product Safety and Standards (OPSS)
Source: Office for Product Safety and Standards, GOV.UK. Contains public sector information licensed under the Open Government Licence v3.0. EU Safety Radar is an independent information service; the text above presents the official data in the original language — the notice published by the authority is authoritative.
Open the original notice (www.gov.uk) ↗ Official document (PDF) ↗