Reason for the recall
- The lifts present a serious risk of the vehicle falling from the lift with the potential of causing death or serious injury.
Reasonsee the original notice
BrandBendPak
Batch number(s)not stated
Barcodenot stated
Product
- Summary
- Product: BendPak XPR-9 Series Two-Post Lifts
- Hazard: The lifts present a serious risk of the vehicle falling from the lift with the potential of causing death or serious injury.
- Corrective action: Users are asked to check whether their products are affected, and follow the instructions set out below.
- Product information
- Type
- Machinery - Two-post Vehicle Lift
- Brand
- BendPak
- Model number
- XPR-9
- Country of Origin
- United States
- Product Description
- BendPak XPR-9 series of two-post vehicle lifts
- Product Report and Image
- Link to product image and PDF
- Hazard
- The lifts present a serious risk of the vehicle falling from the lift with the potential of causing death or serious injury through the following issues:
- The lifts may have been supplied with a mixture of bolts marked as grade 4.8 and 8.8 to secure the arm restraint mechanism. The bolts marked as 4.8 are not of adequate strength.
- Bolts marked as grade 8.8 may be of insufficient strength to meet the standard for grade 8.8 bolts.
- The safety and strength of the arm restraint mechanism relies on the 8.8 bolts being tightened to the correct torque. There is a lack of safety critical instructions regarding the appropriate torque required to ensure adequate strength.
- Affected lifts do not satisfy the requirements of the Supply of Machinery (Safety) Regulations 2008.
- For lifts manufactured between January 2010 and January 2014 please refer to existing HSE Safety Bulletin www.hse.gov.uk/safetybulletins/bendpak-two-post-vehicle-lifts.htm
- For lifts manufactured after 2014 a HSE Safety Bulletin is being issued. Please refer to the HSE website www.hse.gov.uk/safetybulletins/index.htm
- Corrective action
- For lifts manufactured between January 2010 and January 2014 please refer to existing HSE Safety Bulletin www.hse.gov.uk/safetybulletins/bendpak-two-post-vehicle-lifts.htm, or manufacturer issued Technical Service Bulletin 42-102017. The manufacturer has made available replacement parts.
- For lifts manufactured after 2014 the manufacturer has been notified of requirement to contact persons supplied to provide updated user instructions and have withdrawn affected products from the GB market.
- Users should check any Bendpak two-post vehicle lift in the XPR range to ensure that it has the correct grade of bolt (8.8) securing the arm restraint gear mechanism and that it is tightened to the appropriate torque. If manufactured prior to January 2014 users should also check the design of the gear ring in line with HSE Safety Bulletin www.hse.gov.uk/safetybulletins/bendpak-two-post-vehicle-lifts.htm. Users should not use the vehicle lift if any of the issues are identified. Please contact your supplier for more information about the action to take if affected.
- Additional information
- PSD case number: 2304-0136
- Notified by: Health and Safety Executive Product Safety and Market Surveillance Unit
What to do
- Users are asked to check whether their products are affected, and follow the instructions set out below.
- Product information
- Type
- Machinery - Two-post Vehicle Lift
Source: Product Safety Alerts, Reports and Recalls (OPSS) — Office for Product Safety and Standards (OPSS)
Source: Office for Product Safety and Standards, GOV.UK. Contains public sector information licensed under the Open Government Licence v3.0. EU Safety Radar is an independent information service; the text above presents the official data in the original language — the notice published by the authority is authoritative.
Open the original notice (www.gov.uk) ↗ Official document (PDF) ↗